6. OPERATION (POWER TRIM/TILT)
Tilt Lock Lever
Use the tilt lock lever when the boat is
moored.
1. Tilt the motor up as far as it will go
using the power trim/tilt switch.
2. Move the tilt lock lever to the
LOCK position, and lower the out-
board motor until1 the lock lever
contacts the stern bracket (refer to
page 39).
TILT LOCK
It may be necessary to lift the engine
cover grip slightly to swing the tilt
lock lever into the LOCK position.
3. To lower the motor, tilt the motor
up slightly, rnove the tilt lock lever
to the FREE position, and lower the
motor to the desired position.
88
To Next Page
Loading...
Need help?
General
