3. CONTROLS (REMOTE CONTROL TYPE)
Emergency Stop Switch Lanyard
-7
SWITCH LANYARD
The emergency stop switch lanyard is
provided to stop the engine immedi-
ately in the event the operator falls
overboard or away from the controls.
The emergency stop switch clip must
be engaged with the emergency stop
switch, or the engine will not start.
When the emergency stop switch clip
becomes disengaged from the emer-
gency stop switch, the engine
will stop immediately.
’ The emergency engine stop switch
should not be used to normally stop
the engine. Use the ignition switch to
normally stop the engine.
Attach the emergency stop switch lan-
yard securely to the operator when
operating the outboard motor.
SPAkE EMERGENCY
STOP SWITCH CLIP
A spare emergency stop switch clip is
provided on the remote control box.
21
To Next Page
Loading...
Need help?
General
