10. MAINTENANCE
7. Inspect the engine oil level and
refill to the upper limit mark on the
oil level dipstick if necessary. Fill
with the recommended oil.
NOTE: To avoid incorrect gauging
of the engine oil level, inspect the oil
level when the engine has cooled. The
outboard motor needs to be in the
vertical position.
8. Reinstall the oil filler cap and
tighten securely.
Always wash your hands after handling
used oil.
Also, please dispose of used motor oil in
a manner that is compatible with the
environment. We suggest you take it in a
scaled container to your local service
station reclamation center. Do not throw
it in the trash, pour it on the ground,
down a drain. or into the water.
Gear
Oil
Oil check interval:
Every 100 hours.
Oil change interval:
After the first 20 hours or 1 month, then
every 200 hours or 6 months. (Refer to
the maintenance schedule page 106).
OIL CAPACITY:
22.7 fl oz. (670~~)
Recommended oil:
Quicksilver Gear Lube or
Quicksilver Super Duty Lower Unit
Lubricant or equivalent.
110