EasyManuals Logo

Honda Outboard Motor BF75A User Manual

Honda Outboard Motor BF75A
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
10. MAINTENANCE
Engine
Oil
Engine oil is a major factor affecting
engine performance, service life,
and emission.
Oil
check interval:
Each use.
Oil change interval:
After the first 20 hours or 1 month,
then every 100 hours or 6 months.
(Refer to the maintenance schedule
page 106).
Oil capacity:
4.2 US qt (4.0 lit)...When oil filter is
not replaced
4.7 US qt (4.5 lit)...When oil filter is
replaced
Recommended1 oil: SAE low-30 or
1 ow-40
Use 4-stroke motor oil that meets or
exceeds the requirements for API
service classification SC or SH.
Always check the API SERVICE
label on the oil container to be sure
it includes the letters SG or SH.
1 NOTICE]
Using nondetergent oil can shorten
the engine’s service life, and using
t-stroke oil can damage the engine.
OIL LEVEL
DIPSTICK
Engine
Oil Check
Check the engine oil level positioning
the outboard motor vertically.
1. Remove the engine cover.
2. Pull out the dipstick and wipe off.
3. Reinsert the dipstick and pull out
again to check the level.
If the level is near the lower limit,
refill up to upper limit. If the oil is
dirty, replace it. If water is conta-
minated (it becomes white as milk),
see your authorized Honda marine
dealer.
108

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda Outboard Motor BF75A and is the answer not in the manual?

Honda Outboard Motor BF75A Specifications

General IconGeneral
BrandHonda
ModelOutboard Motor BF75A
CategoryOutboard Motor
LanguageEnglish

Related product manuals