EasyManuals Logo

HP Integrity Superdome X User Manual

HP Integrity Superdome X
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
1 Unknown/DETACHED OK 8 0 0.0/8192.0 nPar0001
* D-Degraded
** Actual allocated for Active and User requested for Inactive partitions
To list all the nPartitions and their boot states and runstates (active or inactive states), use the
parstatus -P command on the OA CLI.
parstatus -P
[Partition]
Par State/RunState Status* # of # of ILM/(GB)** Partition Name
=== =============== ======= ==== ==== ============= ==============
1 Inactive/DOWN OK 4 0 0.0/4096.0 nPar0001
2 Active/EFI OK 4 0 0.0/4096.0 nPar0002
* D-Degraded
** Actual allocated for Active and User requested for Inactive partitions
nPartition runstate
The partition runstates displayed by the status commands show the actual state of the partition varying
from a firmware boot state to a state where an OS has successfully booted in a partition. The following
table lists the runstates for an nPartition.
State Description
DOWN The partition is inactive and powered off.
ACTIVATING A boot operation has been initiated for this partition.
FWBOOT The boot process is in the firmware boot phase for this partition and the
partition has transitioned into the active status.
EFI The partition is at the EFI shell.
OSBOOT The boot process has started booting the OS in this partition.
UP The OS in this partition is booted and running.
1
SHUT A shutdown/reboot/reset operation has been initiated on this partition.
DEACTIVATING The partition is being deactivated (powered down) as part of a shutdown
or reboot operation.
RESETTING A partition reset is in progress.
MCA A machine check (MCA) has occurred in the partition and is being
processed.
DETACHED The status is not known. This might reflect an error condition or a
transitional state while partition states are being discovered.
1
OS WBEM drivers must be installed to see this runstate.
nPartition and resource health status
The nPartition and resource status reveals the current health of the hardware. The nPartition resources
can have one of the following usage status:
nPartition runstate 41

Table of Contents

Other manuals for HP Integrity Superdome X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Integrity Superdome X and is the answer not in the manual?

HP Integrity Superdome X Specifications

General IconGeneral
BrandHP
ModelIntegrity Superdome X
CategoryServer
LanguageEnglish

Related product manuals