HP Integrity Superdome X User Manual

Card Gen8 minimum firmware
version
Gen9 minimum firmware
version
HPE Ethernet 10Gb 2-port
560FLB / 560M Adapter
Boot: 3.0.24
UEFI: 4.5.19
Boot: 2.3.45
UEFI: 4.9.10
HPE QMH2672 16Gb 2P FC
HBA
Multiboot: 2.02.47 & 4.0.0.0–1
FW: 7.04.00
BIOS: 3.28
UEFI: 6.21
Multiboot: 2.02.47 & 4.0.0.0–1
FW: 7.04.00
BIOS: 3.31
UEFI: 6.37
Infiniband HPE IB FDR 2P 545M
Adapter
FW: 10.10.50.52
UEFI: 14.6.27
Flexboot: 3.4.306
HPE FlexFabric 20Gb 2P
630FLB / 630M Adapter
MFW: 7.10.72
MBA: 7.10.71
EFI: 7.12.83
UEFI: 7.12.31
iSCSI Boot: 7.10.33
CCM: 7.10.71
L2FW: 7.10.31
HPE FlexFabric 20Gb 2P
650FLB / 650M Adapter
FW: 10.7.110.34
iSCSI Boot EFI: 10.7.110.15
UEFI: 10.7.110.34
iSCSI BIOS: 107.00a9
HPE FlexFabric 10 Gb 2–port
534FLB / 534M Adapter
Boot: 7.10.37
UEFI: 7.10.54
Boot: 7.12.83
7.12.31
Interconnect module firmware
The system supports the LAN Pass-Thru Module, the HPE ProCurve 6120XG and 6125XLG blade
switches, and the HPE 4X FDR Infiniband Switch.
Symptoms of possible firmware issues include erratic server blade, compute enclosure, or other
component operation, or unsuccessful boot to the UEFI boot manager or UEFI shell.
The following are minimum required firmware versions for supported Interconnect modules.
Interconnect module Firmware version
ProCurve 6125XLG blade switch 6125-CMW520-R2112
ProCurve 6120G/XG Ethernet Blade Switch Z.14.52
Table Continued
Interconnect module firmware 91

HP Integrity Superdome X Specifications

General

Brand	HP
Model	Integrity Superdome X
Category	Server
Language	English