2. Select Quick Configs from the maintenance options.
The Quick Configs window is displayed.
When initially configuring and provisioning a server through Intelligent Provisioning, this Quick
Configs screen is presented in the “Step 1: Hardware Settings” (page 21) screen.
If the server does not have HP DIMMs installed, the following Power Profiles might not all be
available:
• Balanced Power and Performance—Optimum settings to maximize power savings with minimal
impact to performance for most OSs and applications.
• Minimum Power Usage—Enables power reduction mechanisms that might negatively affect
performance. This mode guarantees a lower maximum power usage by the system.
• Maximum Performance—Disables all power management options that might negatively affect
performance.
After selecting and applying a profile, a confirmation message appears.
To customize the individual settings, press the F9 key during server reboot to go to the UEFI System
Utilities.
Intelligent Provisioning Quick Configs settings and corresponding UEFI System Utilities
settings
The Quick Configs options provide the capability to select a basic policy for performance versus
power usage, without having to configure individual settings through the UEFI System Utilities
menus.
The following table shows the three Intelligent Provisioning Quick Configs profiles and their
corresponding UEFI System Utilities settings.
48 Performing maintenance
To Next Page
Loading...
Need help?
General