3. Edit the setting(s) that you want. Click Apply.
Modifying Network Settings
Network Settings — Summary
• NIC in use—The current NIC configuration you are using (for example, iLO Dedicated Network
Port, or Shared Network Port.
• iLO Host Name—The DNS name of the iLO subsystem (for example, iLO instead of
ilo.example.com). This name can be used only if DHCP and DNS are configured to connect
to the iLO subsystem name instead of the IP address. For more information, see the HP iLO 4
User Guide.
• MAC Address—The NIC MAC address.
• Link State—The current link state (iLO Dedicated Network Port only).
• Duplex Option—The current duplex option (Full Duplex or Half Duplex).
• DHCPv4 Status—Enabled or Disabled.
• IPv6 Stateless Address Auto-Configuration (SLAAC)—Enabled or Disabled.
• SLAAC Address—Physical address of IPv6 created by iLO.
58 Performing maintenance
To Next Page
Loading...
Need help?
General