23 TECHNICAL DATA 111
Spring length with preload spacer(s) 475 mm (18.7 in)
Spring rate
Weight of rider: 65… 75 kg (143… 165 lb.) 4.4 N/mm (25.1 lb/in)
Weight of rider: 75… 85 kg (165… 187 lb.) 4.6 N/mm (26.3 lb/in)
Weight of rider: 85… 95 kg (187… 209 lb.) 4.8 N/mm (27.4 lb/in)
Fork length 932 mm (36.69 in)
Air chamber length 68 mm (2.68 in)
Oil capacity per fork leg 630 ml (21.3 fl. oz.) Fork oil (SAE 4) (48601166S1) ( p. 113)
23.8 Shock absorber
Shock absorber article number 18.15.7P.69
Shock absorber WP Performance Systems 5018 DCC
Compression damping, low-speed
Comfort 20 clicks
Standard 18 clicks
Sport 16 clicks
Compression damping, high-speed
Comfort 2.5 turns
Standard 2 turns
Sport 1.5 turns
Rebound damping
Comfort 20 clicks
Standard 18 clicks
Sport 16 clicks
Spring preload 15 mm (0.59 in)
Spring rate
Weight of rider: 65… 75 kg (143… 165 lb.) 54 N/mm (308 lb/in)
Weight of rider: 75… 85 kg (165… 187 lb.) 57 N/mm (325 lb/in)
Weight of rider: 85… 95 kg (187… 209 lb.) 60 N/mm (343 lb/in)
Spring length 260 mm (10.24 in)
Gas pressure 10 bar (145 psi)
Static sag 30 mm (1.18 in)
Riding sag 100 mm (3.94 in)
Fitted length 490 mm (19.29 in)
Shock absorber oil Shock absorber fluid (SAE 2.5) (50180751S1) ( p. 113)
23.9 Chassis tightening torques
Screw, pressure regulator EJOT PT
®
K60x25‑Z 3 Nm (2.2 lbf ft) –
Spoke nipple, front wheel M4.5 6 Nm (4.4 lbf ft) –
Spoke nipple, rear wheel M4.5 6 Nm (4.4 lbf ft) –
Screw, battery terminal M5 2.5 Nm (1.84 lbf ft) –
Screw, intake air temperature sensor M5 2 Nm (1.5 lbf ft) –
Screw, shock absorber adjusting ring M5 5 Nm (3.7 lbf ft) –
Screw, spoiler on fuel tank (FE US) M5x12 1.5 Nm (1.11 lbf ft) –
Screws on the main silencer M5 7 Nm (5.2 lbf ft) –
Nut, cable on starter motor M6 4 Nm (3 lbf ft) –
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft) –
Remaining screws, chassis M6 10 Nm (7.4 lbf ft) –
Screw, ball joint of push rod on foot
brake cylinder
M6 10 Nm (7.4 lbf ft) Loctite
®
243™
To Next Page
Loading...
Need help?
General
