7 SPEEDOMETER 24
7.8 Speed, time, and DST distance 1
401901-01
– Press one of the buttons until DST appears on the speedometer.
KM/H or M/H shows the speed.
shows the time.
DST shows the distance since the last reset, such as between two refueling stops.
Info
If the value of 39999.9 is exceeded, DST is automatically reset to 0.0.
Press the left but-
ton briefly.
Next display mode
Press the left but-
ton for 3 – 5 sec-
onds.
DST can be preset to a value between 0.0 and 39999.9 by
pressing the buttons.
Press the right
button briefly.
Next display mode
Press the right
button for 3 – 5
seconds.
DST is reset to 0.0.
7.9 Speed, time, and DST2 distance 2
401902-01
– Press one of the buttons until DST2 appears on the speedometer.
KM/H or M/H shows the speed.
shows the time.
DST2 shows the distance 2 since the last reset, such as between two refueling stops.
Info
If the value of 39999.9 is exceeded, DST2 is automatically reset to 0.0.
Press the left but-
ton briefly.
Next display mode
Press the left but-
ton for 3 – 5 sec-
onds.
DST2 can be preset to a value between 0.0 and 39999.9 by
pressing the buttons.
Press the right
button briefly.
Next display mode
Press the right
button for 3 – 5
seconds.
DST2 is reset to 0.0.
7.10 AVG average speed, ART operating hours, and ODO total distance covered
401903-01
– Press one of the buttons until AVG, ART and ODO appear in the speedometer.
AVG shows the average speed since the last reset.
ART shows the operating hours.
ODO shows the total distance covered.
Press the left but-
ton briefly.
Next display mode
Press the left but-
ton for 3 – 5 sec-
onds.
The OPEN END WRENCH SYMBOL shows the remaining
operating hours until the next service is due.
Press the right
button briefly.
Next display mode
Press the right
button for 3 – 5
seconds.
AVG is reset to 0.0.
To Next Page
Loading...
Need help?
General
