Hypertherm Powermax45 XP User Manual

Cut with the Machine Torch
7
106 809240 Operator Manual Powermax45 XP

Hypertherm does not recommend the use of any other consumables in the
Duramax Lock machine torch except for those listed in this manual. The
use of any other consumables could adversely affect system performance.

For help installing the consumables onto the torch, see page 46. Do not
use worn or damaged consumables. See Inspect the consumables on
page 154.
When you use the following
shielded and FineCut
consumables, select Cut mode
on the front panel. See page 51.
Mechanized shielded consumables
Mechanized shielded consumables with ohmic retaining cap
220817
Shield
220854
Retaining cap
220941
Nozzle
220857
Swirl ring
220842
Electrode
220817
Shield
220953
Ohmic retaining
cap
220941
Nozzle
220857
Swirl ring
220842
Electrode
ARC WELDING SUPPLIES - 07 847 7870

Hypertherm Powermax45 XP Specifications

General

Brand	Hypertherm
Model	Powermax45 XP
Category	Welding System
Language	English