Hypertherm Powermax45 XP User Manual

Operation
2
44 809240 Operator Manual Powermax45 XP
Disable the torch
The Duramax Lock torches include a switch that enables you to lock the torch. This torch-disable
switch prevents the torch from firing accidentally even when the power supply is ON. Use this
switch to lock the torch when it is not in use, when you need to change the consumables, or when
you need to move the power supply or torch while the system is powered ON.
Torch LOCK position:
 The torch-disable switch is
in the backward position,
closer to the torch lead.
 The yellow label with the
“X” indicates the torch is not
ready to fire.
 Point the torch away from
yourself and others, and pull
the trigger to make sure it
does not fire.
 Change the consumables (if
needed).
Torch “ready to fire” position:
 The torch-disable switch is
in the forward position,
closer to the torch head.
 The green label with the
“ ” indicates the torch is
ready to fire.
 Do NOT change the
consumables.
 To change the
consumables without
danger of the torch firing
accidentally, lock the
torch or turn OFF the
power supply.

The first time you pull
the torch trigger after you set the torch to the “ready to fire” position, the
torch emits multiple puffs of air in quick succession. This warns you that
the torch is active and will fire an arc the next time the trigger is pulled.
Seepage45.
ARC WELDING SUPPLIES - 07 847 7870

Hypertherm Powermax45 XP Specifications

General

Brand	Hypertherm
Model	Powermax45 XP
Category	Welding System
Language	English