Icom IC-M802 Instruction Manual

45
10
DSC MENU OPERATION
10
■ Frequency input
A total of 50 frequency pairs can be programmed as
“Call frequency,” “Traffic frequency” or “Scan fre-
quency.” The frequency usage and frequency name
are also programmed together with the frequency.
DD
SETTING PROCEDURES:
NOTE: Up to 6 pairs of frequencies only can be as-
signed as a scan frequency. They are scanned dur-
ing DSC watch mode only. (Different from the dis-
tress/safety frequencies.)
q During DSC menu indication, rotate [CH] to select
“Set up” then push [ENT] to select setup menu.
• The select screen is displayed.
w Rotate [CH] to select the “Call frequency”
“Traffic frequency” or “Scan
frequency,” then push [ENT].
• The call/traffic/scan frequency list screen is displayed.
When the memory is full:
“Memory full” is displayed beside “<add>”
indication when a total of 50 pairs of frequencies
(6 pairs for scan frequency) have been pro-
grammed.
Delete any unnecessary frequency in such cases
(see p. 46 for delete).
e Rotate [CH] to select “<add>” then push [ENT].
•The call/traffic/scan frequency setup screen is dis-
played.
r Push the numeral keys to input the desired 10-
character frequency name, and both transmit and
receive frequencies, then push [ENT].
• Rotate [CH] to move the cursor.
•The frequencies entered should be within the marine
frequency ranges as follows.
1.6– 2.9999 MHz 4.0– 4.9999 MHz
6.0– 6.9999 MHz 8.0– 8.9999 MHz
12.0–13.9999 MHz 16.0–17.9999 MHz
18.0–19.9999 MHz 22.0–22.9999 MHz
25.0–27.5000 MHz
t Push [ENT] to program the contents into a all, traf-
fic or scan frequency.
•Returns to the call/traffic/scan frequency list screen.
•The programmed frequency is displayed at the bottom
line, so [CH] rotation is necessary for the programmed
frequency confirmation.
y Push [MODE SET ] to return to DSC watch mode,
or push [FREQ/CH] to return to the select screen.
******** Set up ********
********
Set up ********
--
Traffic frequency ---
----
Call frequency ----
********
Set up ********
----
Scan frequency ----
<add>
T:
4567.0kHz ICOM Group
R:
4567.0kHz
SEL
OK
Ç
Cancel
******** Set up ********
********
Set up ********
--
Traffic frequency ---
----
Call frequency ----
********
Set up ********
----
Scan frequency ----
SEL
OK
Cancel
Comment:ICOM_Group
TX:_4567.0kHz
RX:_4567.0kHz
******** Set up ********
********
Set up ********
--
Traffic frequency ---
----
Call frequency ----
********
Set up ********
----
Scan frequency ----
SEL OK
Cancel
Comment: † _________
TX:_____._kHz
RX:_____._kHz
******** Set up ********
********
Set up ********
--
Traffic frequency ---
----
Call frequency ----
********
Set up ********
----
Scan frequency ----
<add>
SEL
OK
Ç
Cancel
IC-M802_USA.qxd 02.5.30 11:40 Page 45

Icom IC-M802 Specifications

General

Brand	Icom
Model	IC-M802
Category	Transceiver
Language	English