Icom IC-M802 Instruction Manual

17
71
OPTIONS
2001 NEW
17
AT-130/E AUTOMATIC ANTENNA TUNER
Matches the transceiver to a long wire
antenna with a minimum of insertion loss.
AT-140 AUTOMATIC ANTENNA TUNER
Antenna and control cable receptacles
for easy installation and tuner through
function are available.
PS-60 DC POWER SUPPLY
Provides 13.6 V DC (30 A) output from
an AC outlet.
MN-100 ANTENNA MATCHER
Match the transceiver to a dipole an-
tenna. Covers all HF bands from 1.5 to
30 MHz. 8 m (26.2 ft.) × 2 antenna wires
come attached.
MN-100L ANTENNA MATCHER
match the transceiver to a long wire an-
tenna. Covers all HF bands from 1.5 to
30 MHz. 15 m (49.2 ft.) × 1 antenna wire
comes attached.
AH-710 FOLDED DIPOLE ANTENNA
Covers from 1.9 to 30 MHz band. Has an
SO-239 connector. Easy to assemble
(non-kink construction).
approx. 24.5 m; 80.3 ft
RC-25 REMOTE CONTROLLER
Same as that supplied remote with the
transceiver. Mounting bracket, MB-81, is
supplied with the controller.
SP-24 EXTERNAL SPEAKER
Same as that supplied with the trans-
ceiver. Mounting bracket, MB-82 is sup-
plied with the speaker.
Max. AF input/impedance: 5 W/4 Ω
MB-75 FLUSH MOUNT KIT
For mounting the remote controller (RC-
25) or the SP-24 to a panel.
HM-135 HAND MICROPHONE
Same as supplied with the IC-M802.
OPC-1147 SHIELDED CONTROL CABLE
Shielded control cable protects the trans-
ceiver from RF feedback and extends the
separation between AT-140 and transceiver
up to 10 m (32.8 ft.).
IC-M802_USA.qxd 02.5.30 11:40 Page 71

Icom IC-M802 Specifications

General

Brand	Icom
Model	IC-M802
Category	Transceiver
Language	English