Image Access WideTEK 25 User Manual

Manual Page 103
Error codes, part 3
Error # Error message shown in
the display
Error message sent to
application
Problem description
69 Error 69:
ADC error camera 1
Camera 1 adc error. Test data transfer through analog
digital converter failed. Check cables
/ connectors to camera 1.
70 Error 70:
ADC error camera 2
Camera 2 adc error. Test data transfer through analog
digital converter failed. Check cables
/ connectors to camera 2.
75 General keyboard error General keyboard error. Check
keyboard and cables.
99 Internal error. The firmware has detected an
internal error of unknown cause.
C.3 Warnings
Warning
#
Warning shown in the
display
Warning sent to
application
Problem description
144 Light level is low The light level is found to be low
during the white balance function.
145 Camera adjustment required Camera adjustment required General information about the
camera adjustment. Check for
details and readjust.
160 W160 NO WHITE
BALANCE DATA
No white balance data No white balance data was found.
Perform white balance.
C.4 Information
Info. #
Information shown in the
display
Information sent to
application
Description
200 CREATING
RECOVERY PART..
Creating Recovery Partition While creating the recovery partition,
the scanner can not be accessed.

Image Access WideTEK 25 Specifications

General

Brand	Image Access
Model	WideTEK 25
Category	Scanner
Language	English