Image Access WideTEK 25 User Manual

Manual Page 33
A.12.8 Output Control Screens
The parameters are set in two screens, Output Control 1 and Output Control 2.
To switch between the Output Control screens use the buttons and .
A.12.8.1 Output Control 1
Picture 22: Output Control 1
A.12.8.1.1 Viewer Control
An external monitor can be connected to the WideTEK 25 to show the scanned image
directly.
Touching the Viewer Control button starts the Zoom/Move Control mode. When this
mode is active, the displayed image on the screen can be moved and the zoom factor can
be changed.
Picture 23: Viewer Control
Increases the zoom factor.
Decreases the zoom factor.
Zooms the image to its genuine dimension (100%) without scaling.
Returns to the prior menu.
If the image dimension overlaps the monitor dimension, the navigation keys can be used
to scroll the displayed area on the monitor.
Navigation
keys

Image Access WideTEK 25 Specifications

General

Brand	Image Access
Model	WideTEK 25
Category	Scanner
Language	English