To Next PageTo Next PageTo Previous PageTo Previous Page
How to fix if the Image Access WideTEK 25 image is darker than expected?
If the image from your Image Access Scanner is darker than expected, it could be because the target used for white balance is much brighter than the scanning target. To resolve this, go to the Adjustments function and modify the Brightness Correction setting.
What to do if the Image Access WideTEK 25 Scanner image is brighter than expected?
If the image from your Image Access Scanner is brighter than expected, the document might be much brighter than the target used for white balance. You should go to the Adjustments function and modify the Brightness Correction setting.
Why does my Image Access WideTEK 25 Scanner image have horizontal stripes or streaks?
Horizontal stripes or streaks in your Image Access Scanner image are caused by improper white balance. To fix this, perform the White Balance procedure.
How to correct a red tint in Image Access WideTEK 25 images?
A red tint in Image Access Scanner images can occur if the target used for white balance is more blue than the scanning target. To correct this, go to the RGB adjustments and lower the gain on red.
Why is my Image Access WideTEK 25 image showing a blue tint?
A blue tint in Image Access Scanner images can happen if the target used for white balance is more red than the scanning target. You can fix this by going to the RGB adjustments and lowering the gain on blue.
What to do if the STOP button on the Image Access WideTEK 25 Scanner touch screen doesn't power down the device?
If the STOP button on the touch screen of your Image Access Scanner doesn't power down the device, it may be due to internal software or application issues. First, end all applications and try again. If the problem continues, touch the STOP button for at least 10 seconds, then power up the scanner again.
Why does my Image Access WideTEK 25 image have a red tint even with proper settings?
If your Image Access Scanner image has a red tint despite correct settings, the scanner might be receiving significant amounts of infrared light (from sun or spotlights) that aren't visible to the human eye. Try changing the scanner's position, closing blinds, or dimming/shutting off any bright spotlights.
What to do if touching the Image Access WideTEK 25 touch screen does not power up the device?
If touching the touch screen of your Image Access Scanner does not power up the device, it could be due to a connector failure or a software glitch. Turn the power off for at least 10 seconds. Then, try again after the touch screen is illuminated.
How to troubleshoot if the Image Access WideTEK 25 touch screen does not show the stand-by message?
If the touch screen of your Image Access Scanner doesn't display the stand-by message, the cause could be no power. Check the main outlet, the power cord, and the power-on switch on the left side of the device.
What to do if Image Access Scanner image is brighter than expected?
If the image from your Image Access Scanner is brighter than expected, the document might be much brighter than the target used for white balance. To resolve this, go to the Adjustments function and modify the Brightness Correction setting.
General| Optical Resolution | 600 dpi |
|---|---|
| Resolution | 600 x 600 dpi |
| Color Depth | 48-bit |
| Interface | USB 3.0 |
| Technology | CIS |
| Scanning Width | 25 inch |
| Scanning Speed | 3.5 inches per second |
| Power Consumption | 15W (standby) |
| Operating System Compatibility | Windows, macOS |
Read and understand safety notes for user and device protection.
Precautions for safe operation, preventing personal injury and device damage.
Checks and procedures for safely connecting the scanner to the electrical outlet.
Procedure for switching on the scanner from stand-by mode using the main power switch.
Overview of the integrated touch panel for scanner parameter control.
Steps to start the scanner from stand-by mode by tapping the touch panel.
Procedure for safely powering down the scanner using the touch panel's Stop button.
Procedure for calibrating scanner colors using a white reference sheet.
Adjusting image parameters like brightness, contrast, and gamma for scanned documents.
Advanced image controls including threshold, despeckle, invert, and stitching.
Controls for exposure correction and thresholding for black values.
Setting document format, rotation, mirroring, and splitting options.
Adjusting auto margin, auto density, and auto skew for scanned documents.
Selecting file formats (JPEG, TIFF, PNM, PDF) and their associated compression settings.
Accessing the scanner's web-based user interface via a browser.
Overview of the main screen of the integrated web user interface.
Configuration options for document mode, preview, quality, and scan mode.
Setting file format, color mode, stitching, and other properties for scanning.
Adjusting camera settings like resolution, brightness, contrast, and sharpness.
Setting threshold for black cut or auto exposure, with options for 'No', 'Black Cut', or 'Auto'.
Overview of ten available output options for scanned images.
Saving scanned images to a local or network disk drive, with options to set file name and directory.
Saving scanned images in container formats like ZIP or Multipage PDF.
Printing scanned images directly to a locally configured printer.
Printing scanned images directly to a previously installed network printer.
Directly scanning and uploading files to an FTP server.
Configuring FTP server parameters, including proxy, authentication, and upload path.
Sending scanned images directly via e-mail.
Storing scanned images directly in a network directory using SMB protocol.
Configuring SMB network parameters like port, network type, authentication, and path.
Storing files and images in cloud storage services via web services.
Configuring web services like WebDAV, Google Docs, or Google Picasa for cloud storage.
Direct scanning to USB storage devices.
Accessing different system levels (User, Poweruser, Admin) via password protection.
Navigating the User access level screen to view information and settings.
Accessing and setting user-specific parameters like language and power saving.
Table of common problems, their causes, and recommended actions for troubleshooting.
List and descriptions of error codes reported by the scanner.
