12000 Series Switches
True Scale Fabric Switches 12000 Series Hardware
Installation Guide July 2015
88 Order Number: G91928004US
See Table 7 for a list of RJ45 (on Digi) to RJ11 cross references. The cable should
connect the three RJ45 signals (on the Digi) to the RJ11 connector. The signals for the
T3 card located inside the switch and spine are included for reference only.
§ §
Table 7. Pinout Cross Reference
RJ45 (on Digi) RJ11
T3 RJ45
(reference only)
P5-Rx P5 P6-Tx
P6-Gnd P4 P4-Gnd
P4-Tx P3 P5-Rx