To Next Page

To Previous Page

v100 – Marine Satellite Communication System

SELECT PROCESS TYPE

BACKUP USER DATA

4. Touch UP and DOWN arrow keys to SELECT PROCESS TYPE*

Touch OK key to set the parameter and the processing message will be displayed.

SELECT PROCESS TYPE*

BACKUP USER DATA: To backup the antenna settings set by user to the ACU.

RESTORE USER DATA: To restore the antenna by using the backup user data stored from the ACU.

DEFAULT ACU-REMOTE P/W: to default ID and Password of the Web Server.

UPGRADE FROM USB: to upgrade the system by using the rmware les from a specied folder

in the USB ash drive.

COPY LOG TO USB: to copy the antenna log data from the system to the USB ash drive.

BACKUP TO USB: To backup the antenna settings to a specied folder in the USB ash drive.

RESTORE FROM USB: To restore the antenna by using the backup user data from a specied

folder in the USB ash drive.

UPGRADE ACU-REMOTE: To upgrade the system using rmware les (FWP) from a specied

folder in a USB ash drive.

NOTE: UPGRADE FROM USB, COPY LOG TO USB, BACKUP TO USB, RESTORE

FROM USB and UPGRADE ACU-REMOTE options are displayed only if the USB ash

drive is plugged into the USB port located in the front panel of the ACU.

Management

System menu

Backup and restore

Setup mode

SETUP MODE ?

YES NO

1. Touch LEFT arrow key to move cursor to YES and touch OK key to enter SETUP mode.

+ANTENNA +SATELLIT E

+SYSTEM +INSTALLATION

2. Touch DOWN arrow key to move cursor to SYSTEM menu and touch OK key to enter it.

+SET LOCAL +SE T LOCATION

+MODEM PORT + MANAGEMENT

3. Touch arrow keys to move cursor to MANAGEMENT menu and touch OK key to enter it.

Select process type

Intellian V100 User Manual

Questions and Answers: