GD200A series VFD Function parameters
-95-
Display the rotation speed of the motor.
Range: 0–65535RPM
Display current motor power
Range: -300–300%
Display the current output torque of the VFD.
Range: -250.0–250.0%
Evaluated
motor
frequency
Evaluated frequency of motor rotor
Range: 0.00Hz–P00.03
Display current DC bus voltage of the VFD
Range: 0.0–2000.0V
ON-OFF input
terminals state
Display current Switch input terminals state of the
VFD
Range: 0000–00FF
ON-OFF output
terminals state
Display current Switch output terminals state of
the VFD
Display the adjustment through the keypad of the
VFD.
Range : 0.00Hz–P00.03
Display the torque given, the percentage to the
current rated torque of the motor.
Setting range: -300.0%–300.0%
(motor rated current)
Display the current linear speed of the VFD.
Range: 0–65535
Display the current length of the VFD.
Range: 0–65535
Display the current counting number of the VFD.
Range: 0–65535
It is implemented through the analog
potentiometer on the keypad for the 0150G/018P
and lower models; not available for the
To Next Page
Loading...
Need help?
General