11www.janome.com
User Manual QUILT MAKER PRO 20
About Your Machine
General Specicaons
The Janome QMP 20 uses high-tech electronics and an innovave touch-screen user interface to oer
greater funconality and ease of operaon to home quilters than ever before conceived in the quilng
industry. The Janome QMP 20 quilng machine is a high quality machine that both incorporates robust
design features and is easy to service.
Sewing Opening Dimensions (228 mm X 521 mm) 9 inches X 20.5 inches
Sewing Speed Manual Mode: from 25 stches per minute to 2500 stches per minute
Regulated Mode: from 0 stches per minute to full speed
Stches Per Inch 4 stches per inch to 24 stches per inch
Basng mode: one stch per quarter inch, one stch per half inch,
one stch per inch, one stch every two inches, and one stch every
four inches
Needle System 134
Needle Sizes (recommended) From 80/12 to 130/21
Hook System Rotary, Horizontal Axis, M-class bobbin
Bobbin Type Aluminum, Class M
Bobbin Case Type MF
Motor Type Brushless DC
Needle Posioning Up and down, walking stch, on-screen hand wheel
Electrical Power
100-240 VAC, 50-60Hz, 1.5-3.3A
This machine conforms to UL and internaonal safety
standards for sewing machines and US and internaonal
laws for electromagnec compliance.
Outlet Power 120 was maximum
Sew Foot Stroke/Li 5 mm
Needle Bar Stroke 35.3 mm
Take-Up Stroke 73 mm
Lubricaon, main components Kluber Lube, permanent
Lubricaon of hook Velocite 10, Texaco 22