Janome Quilt Maker Pro 20 - Quilting Alarm and Calculator Tools; On-screen Calculator

51www.janome.com
User Manual QUILT MAKER PRO 20
To set the quilng alarm
Use the quilng alarm to set a reminder that alerts you when the me you’ve alloed for quilng is done.
Aer you enable the alarm, the me begins to count down. Unlike the quilng mer, this alarm measures
elapsed me, not machine quilng me. The example below shows only 3 minutes and 55 seconds are
remaining before the alarm will sound.
000:03:35
00:00:00
5732
Timers & Counters
1. Specify the amount of me that will elapse before the alarm will go o. Change the alarm seng by
pressing the plus (+) or minus (–) buons which increments the seng by one minute at a me.
2. Touch the alarm icon to turn on the quilng alarm. When the me has elapsed, an alarm will sound.
On-screen Calculator
The QMP 20 includes a basic on-screen calculator. It funcons like all basic calculators. For example, press
a number buon and a funcon buon followed by another number buon. Funcon buons include
addion (+), subtracon (–), mulplicaon (x) and division (÷). Aer you’ve pressed the numbers and the
funcon buons, press the equal sign (=) for the answer.
• Touch the Tools buon in the Toolbar. Then touch the Calculator buon along the boom of the
screen. Press the Home buon to return to the Main screen.
Calculator
Touch the alarm
icon to turn on or
o the quilng
alarm. It appears
green when
enabled.
Shows the current quilng alarm seng. Press the plus (+)
or minus (-) buons to change the alarm seng.