Janome Quilt Maker Pro 20 - Touch-Screen Display Usage; Button States and Navigation

40 www.janome.com
User Manual QUILT MAKER PRO 20
Using the Touch-Screen Displays
The QMP 20 has touch-screen displays on the front and rear handlebars. They each work the same. For
example, use the displays to alternate between stch-regulated and non-stch-regulated operaon, to
control sengs for how you prefer your machine to operate, and to use tools such as counng stches
on a quilt or logging how much me it took to nish your quilt.
 NOTE: If you have Pro-Stcher, you should have installed the tablet computer that came with
Pro-Stcher at the front of the machine rather than the 7-inch touch screen. You will then use the
Pro-Stcher tablet to control the funcons of the QMP 20.
Buons are selected, or on, when they are green and display black text or graphics. Buons are o when
they are purple and display white or lighter gray text or graphics. When you touch a buon, it will toggle on
or o, open a pop-up box for you to enter informaon, or open a screen with more opons.
Buon is
selected, or on.
Buon is deselected,
or o
If a buon cannot be used, usually because another process is underway, it will be light gray.
Buon cannot be used
at this me.