JUKI IT-100 User Manual

– 51 –
(4) Optional ID selection screen
(5) No. of pcs. in lot input screen
2
1 3
Switch/display Description
1
No. setting switch This switch is used to enter the number of pieces in a lot.
2
Cancel switch
This switch is used to cancel the entered number of pieces in a lot and to return the
screen to the work management screen.
3
Enter switch
This switch is used to conrm the entered number of pieces in a lot and to return
the screen to the work management screen.
1
It is possible to load the ID setting data edited by the IA-1 on the operational panel.
In the case you use a USB thumb drive, insert the medium recorded in a given folder into the
sewing machine. In this state, the data are automatically loaded on the operation panel by turn-
ing ON the power to the sewing machine.
3
2 4
1
A B
Switch/display Description
1
Clear switch This switch is used to bring the ID status to the unselected state.
2
No. setting switch
This switch is used to select an abbreviated number for the optional ID. In the
case an irregular work is selected, the ongoing irregular work screen is displayed.
3
Cancel switch
This switch is used to cancel the optional ID selection and to return the screen to
the work management screen.
4
Enter switch
This switch is used to conrm the selected optional ID and to return the screen to
the work management screen.
A
Abbreviated number dis-
play
This section displays the two-digit abbreviated number selected with
1
.
B
Optional ID display
This section displays the optional ID which is designated as the one for selected
abbreviated number with 8-digit alphanumeric characters at the maximum.

JUKI IT-100 Specifications

General

Brand	JUKI
Model	IT-100
Category	Sewing Machine
Language	English