– 71 –
1
3 4 5 6 72
No. Setting item Description
1
Sewing common da ta
screen display switch
This switch is used to set the machine-head type and to set the optional input/
output. Refer to
"
$
.2-1. Sewing common data screen"
.
2
Ver. display Refer to the Engineer's Manual for details.
3
Function setting With this setting item, the various functions of the sewing machine can be set
and the number of stitches and the sewing speed can be changed. Refer to
"
#
.4-12. Function setting"
.
4
Sewing management in-
formation
With this setting item, the sewing management information screen No. 1 is dis-
played. Refer to
"
$
. 1-1. Sewing management information"
.
5
Communication mode Refer to the Engineer's Manual for details.
6
Time setting screen On this screen, the time is set. Refer to
"
$
. 1-2. Setting the date and time"
.
7
Changeover to informa-
tion screen No. 2
When this key is held pressed for a longer time, the information screen No. 2 is
displayed.
1
2. MAINTENANCE PERSONNEL LEVEL
1) Turn the power ON.
2) Keep switch
1
held pressed for approximately three seconds to display the information screen.
■
Information screen No. 1 (maintenance personnel level)
To Next Page
Loading...
Need help?
General
