MO-6100D Series (September, 2003) 1/3
● The needle bar, feed and looper mechanisms require no oiling.
This means they do not splash oil, thereby leaving no oil stains on
the sewing material, and thus contributing to upgraded quality.
● The driving section of the machine, except for the needle bar, feed
and looper mechanisms is installed in a forced oiling block.
This block is completely sealed to prevent the leakage of oil.
● Stain-removing work or re-sewing work resulting from oil stains is
eliminated.
● The machine does not need periodical oiling or used-oil disposal,
which markedly improves maintainability.
● Anti-material-slip type
MO-6114D-□□□-30P, MO-6116D-□□□-30P
The sewing machine is fully equipped with adjusting devices and
provisions to effectively prevent puckering of difficult-to-sew
materials or new-generation materials. The operator is able to
produce beautifully finished high-quality seams without conducting
difficult adjustments.
SPECIFICATIONS
Dry-head, High-speed, Overlock / Safety Stitch Machine
M
O
-6100D Series
MO-6114D
Model name MO-6104D MO-6114D MO-6116D
Stitch type 1-needle overlock 2-needle overlock Safety stitching
Stitch style in the U.S.A. 504 514 516
Max. sewing speed 6,000rpm
Stitch length 0.8〜4mm 1.5〜4mm
Needle gauge (mm) − 2.0, 2.4 2.0, 3.2, 4.8
Overedging width (mm) 3.2, 4.0, 4.8 2.0, 3.2, 4.0, 4.8 3.2, 4.0, 4.8
Bottom differential feed ratio For gathering 1:2 (max. 1:4), For stretching 1:0.7 (max. 1:0.6)
Needle bar stroke 24.5mm (anti-material-slip type), 25.5mm (upper looper extra high throw type)
Inclination angle of the needle 20°
Needle mechanism Needle bar method and upper/lower bushing
Needle DC×27 (excluding some subclass model)
Max. lift of the presser foot 7mm (excluding some subclass model)
Max. presser foot pressure 63.7N (6.5kg)
Stitch adjusting method By push-button
Differential-feed adjusting method By lever (with micro-adjustment)
Weight of the machine head 28kg
Lubrication No lubrication
Needle cooler Option
Needle thread heat remover Option
Micro-lifter Provided as standard
SUBCLASS MACHINE LIST
Seams Model No.
Materials
Number
of
needles
Number
of
threads
Needle
gauge
(mm)
Overedging
width (mm)
Number
of
feed dog
rows
Stitch
length
(mm)
Presser
lifting
amount
(mm)
Needle system
Max.
sewing
speed
(rpm)
Bottom
differential-
feed ratio
Remarks
MO-6104D-0D4-40H 1 3 − 3.2 2 4 1:0.7〜1:2 7 DC×27 #11 6,000
MO-6104D-0E4-40H 1 3 − 4.0 2 4 1:0.7〜1:2 7 DC×27 #11 6,000
MO-6104D-0D6-40H
M〜H
13− 3.2 3 4 1:0.7〜1:2 7 DC×27 #11 6,000
MO-6104D-0E6-40H 1 3 − 4.0 3 4 1:0.7〜1:2 7 DC×27 #11 6,000
MO-6104D-0F4-40H 1 3 − 4.8 2 4 1:0.7〜1:2 7 DC×27 #11 6,000
MO-6104D-0F6-40H 1 3 − 4.8 3 4 1:0.7〜1:2 7 DC×27 #11 6,000
■ 1-needle overlock
● For runstitching in general fabric
Upper looper extra
high throw type
To Next Page
Loading...
Need help?
General
