I
IEEE-488 Conformance Information
I-1
Information
The IEEE-488.2 standard requires specific information about how the Model 2001 implements the standard. Paragraph 4.9 of
the IEEE-488.2 standard (Std 488.2-1987) lists the documentation requirements. Table H-1 provides a summary of the require-
ments, and provides the information or references the manual for that information.
Table I-1
IEEE-488 documentation requirements
Requirement Description or reference
(1)
(2)
(3)
(4)
(5)
(a)
(b)
(c)
(d)
(e)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
IEEE-488 Interface Function Codes.
Behavior of 2001 when the address is set outside the range 0-
30.
Behavior of 2001 when valid address is entered.
Power-On Setup Conditions.
Message Exchange Options:
Input buffer size.
Queries that return more than one response message unit.
Queries that generate a response when parsed.
Queries that generate a response when read.
Coupled commands.
Functional elements required for SCPI commands.
Buffer size limitations for block data.
Syntax restrictions.
Response syntax for every query command.
Device-to-device message transfer that does not follow rules of
the standard.
Block data response size.
Common Commands implemented by 2001.
Calibration query information.
Trigger macro for *DDT.
Macro information.
Response to *IDN (identification).
Storage area for *PUD and *PUD?
Resource description for *RDT and *RDT?
See Appendix E
Cannot enter an invalid address.
Address changes and bus resets.
Determined by :SYSTem:POSetup (para. 4.12.10).
256 bytes.
None
All queries (Common Commands and SCPI).
None.
See Table I-2.
Contained in SCPI command subsystems tables (see
Appendix D).
Block display messages: Top display = 20 characters max,
bottom display = 32 characters max.
See paragraphs 4.10 thru 4.12.
See paragraphs 4.9 and 4.12.
None.
See paragraph 4.12.4.
See Appendix D
See Calibration Manual.
Not applicable.
Not applicable.
See paragraph 4.9.5.
Not applicable.
Not applicable.
To Next Page
Loading...
Need help?
General
