Kenwood DNX6180 User Manual

4848
Return to the Top page
Radio, HD Radio, SIRIUS, XM
Memory Operation
Auto memory
You can store stations with good reception in
memory automatically.
This function is for tuner only.
NOTE
• Auto memory terminates when 6 stations are
stored or when all stations are tuned in.
• The operation ends automatically if you do not
operate within 10 seconds.
1
Touch [ ].
Sub function menu appears.
2
Touch desired band key.
3
Touch [ ] in the control screen.
The multi function menu appears.
4
Touch [AME] in the multi function
menu.
5
Touch [1] or [ ] in the sub
function menu.
Auto memory starts.
Manual memory
You can store the current receiving station or
channel in memory.
1
Select a station or channel you wish
to store in memory.
2
Touch [P#] (#:1-6) in which you want
to store the station or channel for 2
seconds until a beep sounds.
Selecting Operation
Preset select
You can list and select memorized station or
channel.
Selecting from the multi function menu
1
Touch the desired number from P1 to
P6.
The unit will tune to the selected station
or channel.
NOTE
• For SIRIUS/XM, touching [ ] and then [Preset
List] displays the preset channel list. You can also
select your desired channel from the list.
Selecting from the preset list
1
Touch illustrated area.
List Control screen appears.
2
Select a station or channel from the
list.

Kenwood DNX6180 Specifications

General

Brand	Kenwood
Model	DNX6180
Category	GPS
Language	English