• The use of lengthened work equipment reduces the stability of the machine.
If it is necessary to rotate the upper structure on a slope or to travel downhill, be particularly careful,
since the machine may lose its balance and overturn.
The following operations are particularly dangerous, therefore it is highly recommended not to perform
them.
1 - Travelling downhill with raised work equipment.
2 - Transversal crossing of slopes.
3 - Rotation of the upper structure on slopes.
RWA07850
WRONG
RWA05150
WRONG
RWA06820
WRONG
• When installing work equipment with dimensions exceeding those of the standard equipment, be care-
ful to the space necessary for the movements of the equipment and for the rotation of the upper struc-
ture.
• Always keep to the correct procedure when installing the boom and arm. Failure to carry out the cor-
rect procedure may result in grave risks, therefore it is advisable to contact a Komastu Utility Dealer
before the installation.
To Next Page
Loading...
Need help?
General
