PRECAUTIONS FOR THE REMOVAL
44
2.7 PRECAUTIONS FOR THE REMOVAL
RWA05380
RWA05390
• The draw hook must be used only for the first aid and not for
towing the machine.
• Before moving the machine, make sure that all the controls are
in neutral.
• Incorrect manoeuvres may result in serious injuries or even
death.
• To move the machine, use properly dimensioned steel cables;
do not use worn cables or cables with broken strands (A),
twisted cables (B), deformed cables (C).
• During the removal, no one can be allowed to get near the ma-
chines or the cable.
• Do not get astride the cable.
• Remove the machine only as much as necessary to permit the
required repairs.
• Put wooden blocks between the towing cable and the machine
body, in order to avoid wear or damage.
• Do not remove the machine in any way other than that indicat-
ed at point “3.15.2 HOW TO REMOVE THE MACHINE”).
CAUTION
• The maximum applicable force for the removal is the fol-
lowing:
F=2675 kg (for PC20R only)
F=3065 kg (for PC27R only).
• Use cables having the same length and draw continuosly
and constantly, without jerks.
• Arrange and couple the machine to be removed by posi-
tioning it on the same axis as the towing vehicle; the
drawing force must be parallel to the axis of movement of
the machine.
To Next Page
Loading...
Need help?
General
