• If it is necessary to work with the machine immersed in water on river banks or sea shores, always
check the water depth and the current flow.
• Make sure that the surface on which you are working is sufficiently firm.
If you have to work in water, check that the maximum depth of immersion is lower than the centre of the top guide
roller, and in any case that the engine cooling fan does not come into contact with the water; otherwise it may
break or be damaged.
• When working in water or on muddy ground, lubricate the articulations more frequently than usual.
• After work, remove any dirt or mud and lubricate the articulations.
RWA10190
To Next Page
Loading...
Need help?
General
