96
PARKING THE MACHINE
3.7 PARKING THE MACHINE
3.7.1 PARKING ON LEVEL GROUND
DANGER
• Park the machine on firm and level ground, in a sufficient-
ly wide space, so that the checks, the daily lubrication and
the refuelling can be carried out without problems.
• Lower the blade and the work equipment to the ground.
• Keep to all the safety rules, in order to avoid any move-
ment of the machine when the operator is absent.
• When leaving the machine, remove the ignition key, use
the handles and lock the cab, if provided.
1 - Park the machine on firm and level ground, in a sufficiently
wide space.
2 - Lower the blade and the bucket to the ground; if there is not
enough space, the work equipment must be folded and se-
cured with the appropriate locks.
3 - Engage the safety lock of the boom swing control, of the op-
tional equipment control and of the upper structure rotation
and shift the safety device lever to the lock position.
4 - Stop the engine following the procedure indicated in para-
graph “3.8 STOPPING THE ENGINE”.
5 - Leave the driving position using the tracks and the handles.
6 - Refuel, taking the necessary precautions.
7 - Remove the ignition key and lock the cab, if provided.
RWA07440
RWA09000
RYA11740
RWA02000
To Next Page
Loading...
Need help?
General
