GENERAL PRECAUTIONS
29
2.2.4 UNAUTHORIZED MODIFICATIONS
2.2.5 LEAVING THE OPERATOR’S SEAT
• Any modification made without the authorization of Komatsu Utility can involve hazards.
• Before making a modification, consult your Komatsu Utility Dealer. Komatsu Utility declines any responsibility
for injuries or damage caused by unauthorized modifications.
RWA04980
RWA08660
RWA08670
• When leaving the operator’s seat, even if temporarily, make
sure that the machine is in a safe position. (See “2.4.13 PARK-
ING THE MACHINE”).
• Before leaving the operator’s seat, carry out the following oper-
ations in the sequence indicated below:
1 - Rest the equipment onto the ground.
2 - Connect the safety devices of the boom swing, optional
equipment and upper structure rotation controls.
3 - Lock the equipment control by shifting the safety device le-
ver to the lock position.
4 - Stop the engine (See “3.8 STOPPING THE ENGINE”).
If you have to go so far away that you will not be able to see the
machine, extract the ignition key.
RYA11740
To Next Page
Loading...
Need help?
General
