Komatsu PC20R-8 User Manual

88
USE OF THE MACHINE
3.6.1.3 OPERATIONAL CHECKS
DANGER
• All the checks must be carried out by the operator while
seated, with fastened safety belt.
• If the machine has been stopped after use or in order to
carry out maintenance operations, the safety devices may
have been disconnected; when the operator gets on the
cab, he must make sure that all the safety locks of the
equipment controls are in the correct position and there-
fore that the equipment cannot move suddenly and cause
accidents.
The checks concern:
1 - the lock position of the safety device;
2 - the accelerator idling position;
3 - the neutral position of the controls.
The following check is carried out by turning the ignition key to
position «» to apply voltage to the control panel and check the
functionality of the acoustic alarm, the fuel level indicator and the
engine oil pressure, generator and preheating warning lights.
RWA01960

Komatsu PC20R-8 Specifications

General

Brand	Komatsu
Model	PC20R-8
Category	Excavators
Language	English