Komatsu PC20R-8 User Manual

SAFETY, NOISE AND VIBRATION PLATES
20
2.1 SAFETY, NOISE AND VIBRATION PLATES
2.1.1 POSITION OF THE SAFETY PLATES
• The safety plates must always be legible and in good conditions; for this reason, if they are dirty with dust, oil or
grease, it is necessary to clean them with a solution made of water and detergent.
Do not use fuel, petrol or solvents.
• If the plates are damaged, ask for new ones to Komatsu Utility or to your Komatsu Utility Dealer.
• In case of replacement of a component provided with a safety plate, make sure that this plate is applied also on
the new piece.
• The machine can be provided with other plates in addition to those indicated below; keep also to the instruc-
tions given in the additional plates, in any case.
MACHINE WITH CAB
RWA00010
RWA00030
RWA00020
RYA11880

Komatsu PC20R-8 Specifications

General

Brand	Komatsu
Model	PC20R-8
Category	Excavators
Language	English