90
USE OF THE MACHINE
3.6.2.2 STARTING WITH COLD ENGINE OR IN
COLD CLIMATES
DANGER
• Do not use any fluid or product that facilitate the cold
starting of the engine, since these are ether-based and
may cause explosions.
1 - Pull the accelerator lever until reaching half of its stroke and
turn the ignition key to the preheating position «» for maxi-
mum 15 seconds in the coldest weather.
The preheating time is determined according to the outside
temperature and the recommended ratio is approximately 1
second for each degree below zero.
The preheating is signalled by the warning light positioned on
the dashboard.
2 - Turn the ignition key to position «» (START) until the en-
gine starts and for maximum 15 seconds.
3 - As soon as the engine starts, release the ignition key, which
will automatically return to position «» and reduce the speed
to idling.
• If the engine does not start at the first attempt, repeat the
operations 1 and 2 after at least 30 seconds, in order not
to overload the battery.
RYA12180
RWA01990
RWA01970
RYA12190
To Next Page
Loading...
Need help?
General
