2-63
PC210/240-ENG
12.6 STOPPING MACHINE
WARNING
• Avoid stopping suddenly. Give yourself ample room when
stopping.
• When stopping the machine, select flat hard ground and avoid
dangerous places. If it is unavoidably necessary to park the
machine on a slope, insert chocks underneath the wheels. As
an additional safety measure, thrust the bucket into the
ground.
• If the control lever is touched by accident, the work equipment
or the machine may move suddenly, and this may lead to a
serious accident. Before leaving the operator’s compartment,
always set the safety lock lever securely to the LOCK position.
1. Put the left and right travelling and steering levers a in the neutral
position, then stop the machine.
12. OPERATION