Komatsu PC210 User Manual

3-17
PC210/240-ENG
21.1 INTRODUCTION OF NECESSARY TOOLS
The following tools are needed when carrying out maintenance. (These tools are provided in tool box)
No. Name of tool Part No. Remarks
1 Wrench Applicable width across flats (S
1
- S
2
)
09002-00810 8 mm - 10 mm
09002-01214 12 mm - 14 mm
09002-01317 13 mm - 17 mm
09002-01922 19 mm - 22 mm
09002-02427 24 mm - 27 mm
09002-03032 30 mm - 32 mm
2 Screwdriver 09033-00190 Interchangeable flat-head and cross-head type
3 Socket wrench 09020-10282 Applicable width across flats
set 10 mm, 13 mm, 14 mm, 17 mm, 19 mm, 22 mm,
24 mm, 27 mm, 30 mm, 32 mm.
Extension, Handle, Joint, Ratchet handle bar
4 Wrench 09002-03641 Applicable width across flats 36 mm - 41 mm
5 Pliers 09036-00150
6 Filter Wrench 09019-08035
7 Grease Pump 07950-10450 For greasing work
8 Nozzle 07951-11400
9 Grease cartridge 07950-90403 (Lithium base grease, 400 g)
10 Hammer 09039-00150
11 Pinch bar 09055-10520
12 Gauge 09054-0009
If any of the above tools are broken, please order them from your Komatsu distributor.
21. STANDARD TIGHTENING TORQUES FOR BOLTS AND
NUTS

Komatsu PC210 Specifications

General

Bucket Capacity	0.8 - 1.2 m³
Travel Speed	5.5 km/h
Max Digging Depth	6, 620 mm
Max Reach	9, 850 mm
Fuel Tank Capacity	400 l
Engine Model	Komatsu SAA6D107E-1