2-81
PC210/240-ENG
12.19 STOPPING ENGINE
NOTICE
If the engine is abruptly stopped before it has cooled down, en-
gine Iife may be greatly shortened. Consequently, do not abruptly
stop the engine apart from an emergency.
In particular, if the engine has overheated, do not abruptly stop
it but run it at medium speed to allow it to cool gradually, then stop
it.
1. Run the engine at low idling speed for about 5 minutes to allow it go
gradually cool down.
2. Turn the key in starting switch a to the OFF position and stop the
engine.
3. Remove the key from starting switch a.
12. OPERATION
a