bizhub PRO C5501 6-35
Machine administrator setting
6
6.2.24 05 Expert Adjustment \ 06 Process Adjustment \ 03 Toner Quality/Exposure
Adjust the toner quantity and exposure for each CMYK value.
1 Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen.
2 Touch [01 System Setting], [05 Expert Adjustment], [06 Process Adjustment], and then [03 Toner
Quality/Exposure].
3 Touch [Next] or [Previous] to display the relevant screen for the color you want to adjust.
4 Touch appropriate level keys under [Toner Quality] and [Exposure] to specify toner quantity and
exposure.
5 Repeat the adjustment steps from 3 to 4 until the desired result is obtained.
6 Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Process Adjustment Menu Screen will be restored.
7 If further changes are required, touch the desired key.
To Next Page
Loading...
Need help?
General
