3
Adjustment
3-36 bizhub PRO C5501
3.4.11 08 Curl Adjustment (FS-520/FS-607)
This adjustment can be used to adjust the compression fixing amount of paper exit decurler roller if any
crease appears in printed sheets.
!
Detail
Available settings vary depending on the finisher type mounted on the machine.
To specify curl adjustment
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [04 Finisher Adjustment] and [08 Curl Adjustment].
The Curl Adjustment Screen will be displayed.
3 Select the desired curl size to match with the current condition.
4 Touch [OK] to restore the Adjustment Menu Screen.
To Next Page
Loading...
Need help?
General
