bizhub PRO C5501 6-43
Machine administrator setting
6
6.2.29 05 Expert Adjustment \ 07 Quality Adjustment \ 05 Custom Screen
Select Line 1 or Line 2 for the Line Screen. When [Line 2] is selected, further selection can be made for the
low line screen (type 2).
For the Dot Screen select Line 1 or Line 2. When [Line 2] is selected, further selection can be made for the
low line screen (type 2).
If screen type has been changed, gamma automatic adjustment will be performed after returning to the user
mode. After completing gamma automatic adjustment, please perform printer gamma offset adjustment
against the changed screen.
!
Detail
For details, see "01 Printer Gamma Offset Adj." on page 6-36 and "02 Printer Gamma Offset Auto Adj."
on page 6-38.
1 Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen.
2 Touch [01 System Setting], [05 Expert Adjustment], [07 Quality Adjustment], and then [05 Custom
Screen].
The Custom Screen Setting Screen will be displayed.
3 Specify [type 1] or [type 2] separately for screens whose priority is set to [Line 2] or [Dot 2].
4 Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
To cancel the change, touch [Cancel].
5 If screen type was changed, touch [Exit] on the Quality Adjustment Screen to display the Copy Screen.
The gamma automatic adjustment will be performed.
6 After the gamma adjustment is complete, adjust the printer gamma offset setting for the screen which
was modified in the machine administrator setting.
To Next Page
Loading...
Need help?
General
