5
User setting
5-6 bizhub PRO C5501
5.2.2 02 Unit Setting
Select the unit of measurement for the value to be entered by user and to be displayed on the touch panel.
1 Follow the procedure on page 5-3 to display the User Setting Menu Screen.
2 Touch [01 System Setting], [02 Unit Setting] in sequence.
3 Select the desired unit key to highlight it.
4 Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the System Setting Menu Screen will be restored.
5 If further changes are required, touch the desired key.
5.2.3 03 Feed Tray Setting \ 01 Paper Setting
Please refer to "2 Paper setting" for the overview of, and instruction on, setting paper.
To Next Page
Loading...
Need help?
General
