bizhub PRO C5501 6-91
Machine administrator setting
6
6.11.2 02 HDD Lock Password
Change the HDD lock password.
The HDD Lock Password cannot be changed unless the Security Strengthen mode is set to On.
1 Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen.
2 Touch [10 Security Setting], and then 02 Change HDD Lock Password.
The Change HDD Lock Password Menu Screen will be displayed.
3 Touch [Current Password] to display the Password Input Screen. Enter the current password and touch
[OK].
4 Touch [New Password] to display the Password Input Screen. Enter the new password and touch [OK].
– Touch [Check Input] to enter the same new password, then touch [OK].
5 Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Security Setting Menu Screen will be restored.
6 If further changes are required, touch the desired key.
To Next Page
Loading...
Need help?
General
