bizhub PRO C5501 3-7
Adjustment
3
3.1.3 01 Printer Adjustment \ 03 FD-Mag. Adjustment
Perform this adjustment to control the magnification to the direction of paper feed.
2
Note
This value is used as the baseline for the Both Sides Adjustment function in the Paper Setting. Specified
value in that adjustment will be an offset estimated from this baseline.
To specify FD-Mag. Adjustment
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Machine Adjustment], [01 Printer Adjustment], and then [03 FD-Mag. Adjustment].
The FD-Mag. Adjustment Screen will be displayed.
3 Touch the required item key.
4 Touch [COPY] tab.
The Copy Screen will be displayed.
5 Select A3 w/11" e 17" w paper, then press [START].
The sample pattern will be output.
To Next Page
Loading...
Need help?
General
