3
Adjustment
3-26 bizhub PRO C5501
7 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Horizontal Position Adjustment Screen will be restored.
8 Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the
desired adjustment value, then touch [<<SET].
Available range: -50 (wide) to +50 (narrow), 1 step = 0.1 mm
9 Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10 If adjustment in any other tray is required, repeat steps from 3 to 9.
11 Touch [Return] to restore the Adjustment Menu Screen.
To Next Page
Loading...
Need help?
General
