bizhub PRO C5501 3-31
Adjustment
3
7 Touch the required size key.
8 Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the
desired adjustment value, then touch [<<SET].
Available range: -128 (left) to +127 (right), 1 step = 0.1 mm
– If specified value is positive, the folding positions move to the right. Or, if negative value is specified,
the folding positions move to the left.
9 Repeat steps 3 to 8 until the desired result is obtained.
10 If adjustment in any other size is required, repeat steps 3 to 9.
11 Touch [Return] to restore the Adjustment Menu Screen.
To Next Page
Loading...
Need help?
General
