9
Optional Accessories
ND Eyepiece Filter CS-A1
Reduces glare when looking through the finder to
measure high-luminance objects. When measuring a
high-luminance object, be sure to place it in front of the
finder.
ND Eyepiece Filter (for high luminance) CS-A39
In particular, the CS-3000HDR has a measurement
range on the high-luminance side that is 20 times wider
than that of the CS-3000/CS-2000Plus, so when
measuring a high-luminance object, be sure to place
this filter in front of the finder.
ND Filter (1/10) CS-A40
ND Filter (1/100) CS-A41
Placed in front of the objective lens for measurement of
high luminance objects.
Calibration Certificate (for ND filter)
Calibration certificates can be attached to the
ND filters
(1/10) CS-A40, ND filters (1/100) and CS-A41.
Closeup Lens CS-A42
Placed in front of the objective lens for measurement of
microscopic objects.
Adapter for CCD camera CS-A36
Placed between the finder and the main unit when a
C-mount industrial camera is used.
Illuminance Adapter CS-A43
Placed in front of the objective lens when measuring
illuminance.
To Next Page
Loading...
Need help?
General
