Safety Symbols
The following symbols are used in this manual to prevent accidents which may occur as a result of
incorrect use of the instrument.
Denotes a sentence regarding a safety warning or caution.
Read the sentence carefully to ensure safe and proper use of
the instrument.
Denotes a prohibited operation.
The operation must never be performed.
Denotes an instruction.
The instruction must be strictly adhered to.
Denotes an instruction.
Disconnect the power plug from the AC outlet.
Denotes a prohibited operation.
Never disassemble the instrument.
Denotes alternating current (AC).
Denotes direct current (DC).
Denotes class II protection against electric shock.
Notes on This Manual
Copying or reproduction of all or any part of the contents of this manual without KONICA MINOLTA’s
permission is strictly prohibited.
The contents of this manual are subject to change without prior notice.
Every effort has been made in the preparation of this manual to ensure the accuracy of its contents.
However, should you have any questions or find any errors or omission, please contact the nearest
KONICA MINOLTA-authorized service facility.
KONICA MINOLTA will not accept any responsibility for consequences arising from the use of the
instrument.
To Next Page
Loading...
Need help?
General
