Konica Minolta CS-3000HDR User Manual

73
Measurement
Saving Measurement Values
This instrument can save 100 measurement values with designated numbers from 00 to 99.
Operating Procedure
1
. When the MEAS screen is displayed,
press
MEMORY
key to switch
to the MEMORY screen.
The MEMORY (Measurement Value) screen
appears on the LCD.
The memory data number 00 is displayed.
MEMORY
SPD
N r m
CMF
2 ˚
SYN
[
Hz
]
59.94
ACC
Non
MEMORY 00
Lv 7.285
x 0.1700
y 0.0938
cd
m
2
MEASURE
Lv 54.22
x 0.4045
y 0.4073
cd
m
2
2
. Press either or key to select
the number of memory data to which
the measurement value is saved.
Press key for a larger number.
Press
key for a smaller number.
SPD
N r m
CMF
2 ˚
SYN
[
Hz
]
59.94
ACC
Non
Lv
x
y
MEASURE
Lv 54.22
x 0.4045
y 0.4073
MEMORY
MEMORY 10
cd
m
2
cd
m
2
3
. Press
ENTER
key.
If a measurement value has already been registered
for the selected number, the display switches to the
confirmation screen for overwriting. To overwrite it,
select [OK]. To cancel it, select [CANCEL] and press
ENTER
key. Once it is overwritten, it cannot be
restored to the state before the overwrite. Check the
memory data number carefully before overwriting it.
Measured values are saved in the selected number.
By pressing
ESC
key, saving is canceled and
the MEAS screen appears again on the LCD.
SPD
N r m
CMF
2 ˚
SYN
[
Hz
]
59.94
ACC
Non
Lv 54.22
x 0.4045
y 0.4073
MEASURE
Lv 54.22
x 0.4045
y 0.4073
MEMORY
MEMORY 10
cd
m
2
cd
m
2
2, 3
1

Konica Minolta CS-3000HDR Specifications

General

Brand	Konica Minolta
Model	CS-3000HDR
Category	Measuring Instruments
Language	English